SAP 인증 C_TSCM42_64 덤프

ITExamDump는SAP C_TSCM42_64시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의SAP C_TSCM42_64시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는SAP C_TSCM42_64시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면SAP인증 C_TSCM42_64시험은 무조건 패스해야 합니다. 하지만SAP인증 C_TSCM42_64시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는SAP인증 C_TSCM42_64시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전SAP인증 C_TSCM42_64덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는SAP인증 C_TSCM42_64영어버전덤프만 공부하시면 자격증을 딸수 있습니다.

ITExamDump 는 여러분의 it전문가 꿈을 이루어드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도SAP C_TSCM42_64인증시험으로 고민하시고 계십니까?SAP C_TSCM42_64인증시험가이드를 사용하실 생각은 없나요? ITExamDump는 여러분에 편리를 드릴 수 잇습니다. ITExamDump의 자료는 시험대비최고의 덤프로 시험패스는 문제없습니다. ITExamDump의 각종인증시험자료는 모두기출문제와 같은 것으로 덤프보고 시험패스는 문제없습니다. ITExamDump의 퍼펙트한 덤프인 M crosoftC_TSCM42_64인증시험자료의 문제와 답만 열심히 공부하면 여러분은 완전 안전히SAP C_TSCM42_64인증자격증을 취득하실 수 있습니다.

IT인증시험을 쉽게 취득하는 지름길은ITExamDump에 있습니다. ITExamDump의SAP인증 C_TSCM42_64덤프로 시험준비를 시작하면 성공에 가까워집니다. SAP인증 C_TSCM42_64덤프는 최신 시험문제 출제방향에 대비하여 제작된 예상문제와 기출문제의 모음자료입니다. SAP인증 C_TSCM42_64덤프는 시험을 통과한 IT업계종사자분들이 검증해주신 세련된 공부자료입니다. ITExamDump의SAP인증 C_TSCM42_64덤프를 공부하여 자격증을 땁시다.

근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. SAP인증 C_TSCM42_64시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이SAP인증 C_TSCM42_64시험을 한방에 패스하도록 실제시험문제에 대비한SAP인증 C_TSCM42_64덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.

여러분이 우리SAP C_TSCM42_64문제와 답을 체험하는 동시에 우리ITExamDump를 선택여부에 대하여 답이 나올 것입니다. 우리는 백프로 여러분들한테 편리함과 통과 율은 보장 드립니다. 여러분이 안전하게SAP C_TSCM42_64시험을 패스할 수 있는 곳은 바로 ITExamDump입니다.

시험 번호/코드: C_TSCM42_64

시험 이름: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)

C_TSCM42_64 덤프무료샘플다운로드하기: http://www.itexamdump.com/C_TSCM42_64.html

NO.1 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C

SAP시험문제   C_TSCM42_64   C_TSCM42_64   C_TSCM42_64   C_TSCM42_64덤프

NO.2 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D

SAP   C_TSCM42_64   C_TSCM42_64자료   C_TSCM42_64

NO.3 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B

SAP   C_TSCM42_64   C_TSCM42_64   C_TSCM42_64 dumps   C_TSCM42_64시험문제

NO.4 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B

SAP dump   C_TSCM42_64인증   C_TSCM42_64   C_TSCM42_64   C_TSCM42_64

NO.5 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E

SAP자격증   C_TSCM42_64인증   C_TSCM42_64 pdf   C_TSCM42_64

NO.6 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D

SAP dumps   C_TSCM42_64   C_TSCM42_64   C_TSCM42_64기출문제

NO.7 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C

SAP   C_TSCM42_64   C_TSCM42_64   C_TSCM42_64

NO.8 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B

SAP기출문제   C_TSCM42_64자료   C_TSCM42_64

NO.9 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B

SAP pdf   C_TSCM42_64   C_TSCM42_64자격증

NO.10 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A

SAP자료   C_TSCM42_64   C_TSCM42_64인증   C_TSCM42_64 dumps

ITExamDump의SAP인증 C_TSCM42_64덤프공부가이드에는SAP인증 C_TSCM42_64시험의 가장 최신 시험문제의 기출문제와 예상문제가 정리되어 있어SAP인증 C_TSCM42_64시험을 패스하는데 좋은 동반자로 되어드립니다. SAP인증 C_TSCM42_64시험에서 떨어지는 경우SAP인증 C_TSCM42_64덤프비용전액 환불신청을 할수 있기에 보장성이 있습니다.시험적중율이 떨어지는 경우 덤프를 빌려 공부한 것과 같기에 부담없이 덤프를 구매하셔도 됩니다.