2013년 10월 6일 일요일

EMC 자격증 E20-326 시험덤프

ITExamDump의 EMC인증 E20-326시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 EMC인증 E20-326덤프가 신뢰성을 다시 한번 인증해주는것입니다. EMC인증 E20-326시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 EMC인증 E20-326덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.

EMC 인증 E20-326시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 EMC 인증 E20-326덤프는EMC 인증 E20-326시험을 쉽게 만듭니다.

EMC E20-326인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.EMC E20-326시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는EMC E20-326관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸EMC E20-326관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게EMC E20-326응시하는데 많은 도움이 될 것입니다.

ITExamDump의 EMC인증 E20-326시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 EMC인증 E20-326시험덤프로 어려운 EMC인증 E20-326시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.

요즘같이 시간인즉 금이라는 시대에, 우리 ITExamDump선택으로EMC E20-326인증시험응시는 아주 좋은 딜입니다. 우리는 100%시험패스를 보장하고 또 일년무료 업데이트서비스를 제공합니다. 그리고 시험에서 떨어지셨다고 하시면 우리는 덤프비용전액 환불을 약속 드립니다.

우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는EMC E20-326관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.

시험 번호/코드: E20-326
시험 이름: EMC (Symmetrix Solutions Design Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 132 문항
업데이트: 2013-10-05

E20-326 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-326.html

NO.1 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the HP-UX Servers,
to list the software modules installed?
A. swlist
B. lslpp
C. pkginfo
D. pkgchk
Answer: A

EMC기출문제   E20-326최신덤프   E20-326덤프   E20-326   E20-326 dumps

NO.2 A customer will migrate existing AIX, HP-UX and Windows hosts from a DMX-3 to a new VMAX array.
You need performance data from the existing array to design to the new VMAX volumes configuration
layout. Which tools can be used to collect Symmetrix array performance data?
A. ControlCenter Performance Manager and STP Collector
B. EMC Workload Generator and STP Navigator
C. Storage Configuration Advisor and STP Collector
D. ControlCenter Performance Manager and SymmMerge
Answer: A

EMC pdf   E20-326   E20-326최신덤프   E20-326

NO.3 A Symmetrix VMAX has been configured with Dynamic Cache Partitions.
What is a criterion that must be met for a cache slot to be eligible for donation?
A. The fall through time must be greater than the donation age
B. The fall through time must be less than the donation age
C. The cache slot must belong to a static partition
D. There must be available cache slots in the default partition
Answer: A

EMC인증   E20-326인증   E20-326   E20-326   E20-326   E20-326

NO.4 A customer is interested in utilizing SRDF/AR to generate a remote copy of an application with an RPO
of six hours. In order for you to calculate the bandwidth requirements you will need to run Change Tracker.
To which should you set the reset interval length for DeltaMark?
A. 21600
B. 86400
C. 32400
D. 10800
Answer: D

EMC시험문제   E20-326   E20-326시험문제   E20-326시험문제   E20-326자격증

NO.5 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports their environment can tolerate five minutes or less of data recovery
following a disaster but have not yet determined the maximum allowable downtime for their applications.
The customer asks which remote replication methods you recommend for their environment.
What do you recommend?
A. Defer making a recommendation until the application RTO is known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RPO in known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A

EMC   E20-326   E20-326 dumps   E20-326

NO.6 A customer plans to migrate existing AIX, HP-UX and IBM iSeries hosts to a new VMAX array.
Performance data is needed to design the VMAX volumes configuration layout.
What host performance data do you request from the customer?
A. IOSTAT, SAR, WRKDSKSTS
B. STP, Perfmon, SMF/CMF
C. IOSTAT, STP, WRKDSKSTS
D. Perfmon, SAR, SMF/CMF
Answer: A

EMC   E20-326   E20-326덤프   E20-326시험문제   E20-326

NO.7 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the AIX Servers, to
list the software modules installed?
A. pkginfo
B. lslpp
C. swlist
D. cfgmgr
Answer: B

EMC자료   E20-326   E20-326   E20-326   E20-326

NO.8 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a static partition reaches the write pending limit set for that
partition?
A. Cache will be borrowed from a flexible partition
B. Cache will be borrowed from the default partition
C. Host write activity to that partition will be throttled
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: C

EMC   E20-326   E20-326   E20-326   E20-326

NO.9 You are proposing a new VMAX array with FAST VP. The customer reports their application needs a
small amount of EFD capacity and asks whether 200 GB EFDs or 400 GB EFDs would provide better
overall performance. Which drive size do you recommend and why?
A. 400 GB EFDs. They support higher IOPS than 200 GB EFDs.
B. 200 GB EFDs. They support higher I/O density than 400 GB EFDs.
C. 400 GB EFDs. They support higher I/O density than 200 GB EFDs.
D. 200 GB EFDs. They support higher IOPS than 400 GB EFDs.
Answer: B

EMC최신덤프   E20-326기출문제   E20-326   E20-326인증   E20-326자료

NO.10 You are designing a new VMAX array. The customer's primary concern is maximizing capacity
available to the host. What RAID protection should you recommend?
A. RAID-5 (7+1)
B. RAID-6 (6+2)
C. RAID-1/0
D. RAID-5 (3+1)
Answer: A

EMC자료   E20-326   E20-326   E20-326   E20-326시험문제

NO.11 A customer is interested in utilizing TimeFinder/Snap to generate a backup copy of an application
every six hours. In order for you to calculate the SAVE Pool requirements you will need to run Change
Tracker. To which value should you set the reset interval length for DeltaMark?
A. 21600
B. 10800
C. 86400
D. 32400
Answer: A

EMC   E20-326시험문제   E20-326 pdf   E20-326   E20-326 dump

NO.12 Prior to starting an implementation, which tool should be used to automate the data collection on a
Windows host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: B

EMC최신덤프   E20-326기출문제   E20-326

NO.13 A TimeFinder/Snap of production data must be recreated in a four hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every four hours
B. SUM report over four hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A

EMC자료   E20-326 dumps   E20-326기출문제   E20-326자격증

NO.14 You are designing a new VMAX array. The customer requires high performance for their random
write-intensive application. Which RAID protection should you recommend?
A. RAID-5
B. RAID-6
C. RAID-1
D. RAID-S
Answer: C

EMC dumps   E20-326 dump   E20-326   E20-326최신덤프

NO.15 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports the maximum allowable downtime for their applications is ninety minutes,
but they have not yet determined how much data recovery following a disaster their environment can
tolerate.
The customer asks which remote replication method you recommend for their environment.
What do you recommend.?
A. Defer making a recommendation until the application RPO in known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RTO is known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A

EMC pdf   E20-326   E20-326인증   E20-326덤프

NO.16 A customer plans to migrate existing AIX and Windows hosts as well as Mainframe z/OS LPARs to a
new VMAX array. Performance data is needed to design the VMAX volumes configuration layout. Which
host performance data do you request from the customer?
A. STP, SAR, WRKDSKSTS
B. SAR, Perfmon, WRKDSKSTS
C. IOSTAT, Perfmon, SMF/CMF
D. IOSTAT, SAR, SMF/CMF
Answer: C

EMC자료   E20-326   E20-326자료

NO.17 What is a best practice when configuring a Symmetrix VMAX for optimal performance and cost?
A. Different drive types are mixed and spread throughout the array.
B. Dedicated engines have appropriate drive types to meet application needs.
C. A dedicated array with Enterprise Flash Drives (EFD).
D. A dedicated array based upon application requirement.
Answer: A

EMC   E20-326시험문제   E20-326   E20-326

NO.18 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a flexible partition reaches the write pending limit set for that
partition?
A. Host write activity to that partition will be throttled
B. Cache will be borrowed from the other flexible partition
C. Cache will be borrowed from the default partition
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: A

EMC   E20-326   E20-326   E20-326 pdf   E20-326인증

NO.19 Prior to starting an implementation, which tool should be used to automate the data collection on a UNIX
host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: A

EMC pdf   E20-326   E20-326   E20-326자격증

NO.20 A TimeFinder/Snap of production data must be recreated in a two hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every two hours
B. SUM report over two hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A

EMC pdf   E20-326 dump   E20-326시험문제

ITexamdump의 1Z0-511덤프의 VCE테스트프로그램과 PMI-100덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-464시험에 대비한 고품질 덤프와 70-341시험 최신버전덤프를 제공해드립니다. 최고품질 C_TADM53_70시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/E20-326.html

댓글 없음:

댓글 쓰기