여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이Network Appliance NS0-163인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 ITExamDump는 이러한 꿈을 이루어드립니다.
Network Appliance NS0-163인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리Network Appliance NS0-163인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.
Network Appliance인증 NS0-163시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신Network Appliance인증 NS0-163시험에 대비한Network Appliance인증 NS0-163덤프를 발췌하였습니다. Network Appliance인증 NS0-163덤프는Network Appliance인증 NS0-163시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 Network Appliance인증 NS0-163덤프를 추천합니다.
시험 번호/코드: NS0-163
시험 이름: Network Appliance (Network Appliance Data Protection Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 154 문항
업데이트: 2013-11-12
많은 시간과 정신력을 투자하고 모험으로Network Appliance인증NS0-163시험에 도전하시겠습니까? 아니면 우리ITExamDump 의 도움으로 시간을 절약하시겠습니까? 요즘 같은 시간인 즉 모든 것인 시대에 여러분은 당연히 ITExamDump의 제품이 딱 이라고 생각합니다. 그리고 우리 또한 그 많은 덤프판매사이트 중에서도 단연 일등이고 생각합니다. 우리 ITExamDump선택함으로 여러분은 성공을 선택한 것입니다.
NS0-163 덤프무료샘플다운로드하기: http://www.itexamdump.com/NS0-163.html
NO.1 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD
Network Appliance dump NS0-163 NS0-163자료 NS0-163 dump NS0-163기출문제
NO.2 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D
Network Appliance NS0-163 NS0-163 NS0-163 NS0-163 NS0-163인증
NO.3 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD
Network Appliance NS0-163덤프 NS0-163 NS0-163최신덤프
NO.4 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D
Network Appliance NS0-163 dumps NS0-163덤프 NS0-163 NS0-163
NO.5 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
Network Appliance NS0-163 NS0-163 dump NS0-163시험문제 NS0-163최신덤프
NO.6 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A
Network Appliance NS0-163기출문제 NS0-163 dumps NS0-163 pdf NS0-163인증 NS0-163
NO.7 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C
Network Appliance자료 NS0-163 NS0-163기출문제 NS0-163시험문제 NS0-163인증 NS0-163
NO.8 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B
Network Appliance기출문제 NS0-163 dump NS0-163 NS0-163 pdf
NO.9 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C
Network Appliance인증 NS0-163자격증 NS0-163 NS0-163
NO.10 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C
Network Appliance기출문제 NS0-163 pdf NS0-163자료
NO.11 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D
Network Appliance자격증 NS0-163 pdf NS0-163 NS0-163
NO.12 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
Network Appliance dump NS0-163 pdf NS0-163 pdf NS0-163 NS0-163 NS0-163
NO.13 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B
Network Appliance NS0-163인증 NS0-163덤프 NS0-163 NS0-163
NO.14 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B
Network Appliance pdf NS0-163 NS0-163 NS0-163
NO.15 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D
Network Appliance기출문제 NS0-163 pdf NS0-163 NS0-163 NS0-163 NS0-163
NO.16 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B
Network Appliance NS0-163자료 NS0-163 NS0-163시험문제 NS0-163기출문제
NO.17 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A
Network Appliance dumps NS0-163자료 NS0-163 NS0-163 NS0-163자격증
NO.18 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B
Network Appliance NS0-163 NS0-163최신덤프 NS0-163 NS0-163 NS0-163
NO.19 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A
Network Appliance NS0-163시험문제 NS0-163 NS0-163 NS0-163
NO.20 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B
Network Appliance NS0-163 NS0-163자료
ITexamdump의 650-304덤프의 VCE테스트프로그램과 000-156덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-461시험에 대비한 고품질 덤프와 646-365시험 최신버전덤프를 제공해드립니다. 최고품질 00M-617시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기