지금21세기 IT업계가 주목 받고 있는 시대에 그 경쟁 또한 상상할만하죠, 당연히 it업계 중Dell DC0-261인증시험도 아주 인기가 많은 시험입니다. 응시자는 매일매일 많아지고 있으며, 패스하는 분들은 관련it업계에서 많은 지식과 내공을 지닌 분들뿐입니다.
IT인증시험을 쉽게 취득하는 지름길은ITExamDump에 있습니다. ITExamDump의Dell인증 DC0-261덤프로 시험준비를 시작하면 성공에 가까워집니다. Dell인증 DC0-261덤프는 최신 시험문제 출제방향에 대비하여 제작된 예상문제와 기출문제의 모음자료입니다. Dell인증 DC0-261덤프는 시험을 통과한 IT업계종사자분들이 검증해주신 세련된 공부자료입니다. ITExamDump의Dell인증 DC0-261덤프를 공부하여 자격증을 땁시다.
ITExamDump는Dell인증DC0-261시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Dell인증DC0-261시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Dell인증DC0-261시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
시험 번호/코드: DC0-261
시험 이름: Dell (Dell Storage Networking Professional Exam - Version 2)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 124 문항
업데이트: 2014-04-27
아직도 Dell인증DC0-261시험준비를 어떻게 해야 할지 망설이고 계시나요? 고객님의 IT인증시험준비길에는 언제나 ITExamDump가 곁을 지켜주고 있습니다. ITExamDump시험공부자료를 선택하시면 자격증취득의 소원이 이루어집니다. Dell인증DC0-261시험덤프는ITExamDump가 최고의 선택입니다.
인터넷에는Dell인증 DC0-261시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Dell인증 DC0-261공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Dell인증 DC0-261덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.
Dell인증 DC0-261시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. Dell인증 DC0-261시험을 패스하려면 ITExamDump의Dell인증 DC0-261덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. Dell인증 DC0-261덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.
DC0-261 덤프무료샘플다운로드하기: http://www.itexamdump.com/DC0-261.html
NO.1 You have installed SAN Copy. Which statement is true?
A. The storage array must be rebooted.
B. SAN Copy cannot be upgraded, except by a complete re-install.
C. Any LUN within the SAN is automatically made available to be copied.
D. The admhost utility must be installed on each storage array that Navisphere Manager resides on.
E. SAN Copy sessions can be managed through the Navisphere Manager Enterprise Storage window.
Answer: E
Dell pdf DC0-261기출문제 DC0-261 DC0-261
NO.2 What steps should you perform to create a copy of a source LUN in a second storage array, while
minimizing unavailability of the source LUN?
A. use SAN Copy to copy the source LUN, then take a snapshot on the second storage array
B. take a snapshot of the source LUN, then use SAN Copy to copy the snapshot to the second storage
array
C. take a snapshot of the source LUN, then use SAN Copy to copy the source LUN to the second storage
array
D. take a snapshot of the source LUN, run MirrorView to mirror the snapshot to the second array, then
use SAN Copy to synchronize the mirror with the source LUN
Answer: B
Dell기출문제 DC0-261 DC0-261 dump DC0-261 dump
NO.3 How many LUNs are required for the Clone Private LUN?
A. one per SP
B. one per clone
C. one per clone group
D. one per storage system
Answer: A
Dell dump DC0-261 DC0-261최신덤프 DC0-261 pdf DC0-261
NO.4 You have a source LUN on a CX500 for which you maintain snapshots for tape backup. You need to
create a new snapshot for this source LUN but are unable to do so. You can create snapshots of other
source LUNs on the array. What is the most likely problem?
A. You have reached the maximum limit of 50 Cache LUNs.
B. You have reached the maximum limit of 8 snapshots per source LUN.
C. You have reached the maximum limit of 150 snapshots per storage system.
D. You have reached the maximum limit of 300 snapshots per storage system.
Answer: B
Dell최신덤프 DC0-261 dump DC0-261
NO.5 You are concerned that the loss of an SP might cause you to lose all of your existing snapshot
sessions. What should you do to prevent losing existing snapshot sessions?
A. add a UPS to the storage array
B. use PowerPath to gain failover support
C. select the Persistent mode when starting a snapshot session
D. Nothing, the Vaulting process automatically saves all snapshots to disk in the PSM LUN.
Answer: C
Dell덤프 DC0-261 DC0-261 DC0-261덤프 DC0-261
NO.6 Which three statements are correct about clones? (Choose three.)
A. Clones can be copied using SAN Copy to a remote storage array.
B. Clones typically consume about 20% of the size of the source LUN.
C. Fractured clones can later be synchronized with the source LUN to update the contents.
D. Clones can be fractured from the source LUN, then mounted to a secondary host and accessed just
like another LUN.
Answer: ACD
Dell DC0-261 DC0-261 DC0-261
NO.7 Which four LUN characteristics can be displayed in Navisphere Analyzer? (Choose four.)
A. Bytes Tx / Rx
B. Utilization (%)
C. Capacity (GB)
D. Response Time (ms)
E. Total Bandwidth (MB/sec.)
F. Total Throughput (I/O /sec.)
Answer: BDEF
Dell DC0-261 dumps DC0-261 DC0-261 DC0-261자격증
NO.8 Which two tasks can Navisphere Analyzer perform? (Choose two.)
A. comparing archived and real-time performance data
B. tracking performance trends for Dell / EMC switches
C. tracking performance trends for Dell / EMC storage arrays
D. tracking performance trends for hosts connected to Dell / EMC Storage Area Networks (SANs)
Answer: AC
Dell DC0-261 DC0-261 DC0-261
NO.9 Which three statements are correct about using SnapView? (Choose three.)
A. Snapshots can take mere seconds to create.
B. Snapshots may be created using the admhost CLI utility.
C. SnapView can take snapshots, or point-in-time copies of LUNs.
D. SnapView can make clones, or 100% duplicate copies of a LUN.
E. Snapshots are volume-level and thus able to restore specific files.
Answer: ACD
Dell DC0-261 DC0-261 DC0-261
NO.10 Which utility should you use to add LUN management functionality to a server when using SAN Copy?
A. naviadm
B. admhost
C. admcopy
D. admsnap
Answer: B
Dell dumps DC0-261 DC0-261 DC0-261 pdf DC0-261덤프 DC0-261
NO.11 Which three operations are possible using clones? (Choose three.)
A. Up to eight clones can be made from a single source LUN.
B. While a clone is fractured, it can be connected to a host for use.
C. A fractured clone can be accessed for read and write operations.
D. A snapshot of a clone must be reverse synchronized prior to mounting.
E. A live clone can be mounted by a secondary host to use as a standard LUN.
Answer: ABC
Dell DC0-261 DC0-261자료 DC0-261
NO.12 Which three statements are correct about SAN Copy? (Choose three.)
A. SAN Copy can be installed on any model CX array.
B. SAN Copy is a storage array-based Data Mover application.
C. SAN Copy transfers data over a Fibre Channel SAN, as opposed to an IP LAN.
D. SAN Copy sessions can be managed either by Navisphere Manager or by CLI.
Answer: BCD
Dell자료 DC0-261최신덤프 DC0-261최신덤프 DC0-261시험문제 DC0-261 dumps
NO.13 Which statement best describes bi-directional mirroring as implemented by MirrorView ?
A. By utilizing two storage systems, a single storage system can be configured as the primary for one
mirror and a secondary for another mirror.
B. By utilizing two storage systems and one tape drive, the two storage systems are configured as a
primary and the secondary is backed up to tape.
C. By utilizing two storage systems, a single storage system is configured as the primary and the other
storage system is configured as the secondary.
D. By utilizing three storage systems, the two storage systems are configured as a primary and the third
storage system is configured as a secondary that is used to store the primary images.
Answer: A
Dell DC0-261 DC0-261 DC0-261자격증 DC0-261기출문제 DC0-261자료
NO.14 You want to implement site level disaster recovery. Which two are valid options to consider? (Choose
two.)
A. Use SAN Copy to copy LUNs from the primary site to the recovery site.
B. Use SAN Copy to mirror a LUN from the primary site to the recovery site.
C. Use MirrorView to mirror LUNs from the primary site to another local array.
D. Use SnapView to create a clone, then use SAN Copy to copy the clone to the recovery site.
Answer: AD
Dell DC0-261최신덤프 DC0-261최신덤프 DC0-261덤프 DC0-261 dump
NO.15 Which two are examples of how SnapView can be used in conjunction with MirrorView? (Choose two.)
A. SnapView can be used to take a snapshot of the remote mirror for use at the remote site.
B. SnapView can be used to take a snapshot of the remote mirror and then back up the snapshot to tape.
C. SnapView can be used to take a snapshot of the primary mirror and then mirror the snapshot to the
remote site.
D. SnapView can be used to take a snapshot of the remote mirror and then clone the snapshot for use at
the primary site.
Answer: AB
Dell DC0-261덤프 DC0-261 DC0-261 DC0-261
NO.16 SAN Copy sessions offer which three capabilities? (Choose three.)
A. providing content push or pull capability
B. offloading Storage Array processing onto hosts
C. migrating data from older arrays to newer arrays in the same SAN fabric
D. distributing and collecting content between the central location and branch offices
Answer: ACD
Dell DC0-261인증 DC0-261덤프
NO.17 You are connecting a CX700 to a CX500 through a fabric for Mirrorview. Which two zones must be
completed? (Choose two.)
A. Port 1 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
B. Port 1 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
C. Port 3 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
D. Port 3 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
Answer: CD
Dell dumps DC0-261 DC0-261자료 DC0-261 dump
NO.18 You want User1 to have Administrator access to storage system A that is located in a branch office.
However, you want User1 to have read-only access to the remaining storage systems within the domain.
Which scenario best accomplishes this task?
A. User accounts must be either global or local because the user inherits the most restrictive role
assigned to the user.
B. Create a local account with Administrator access on storage system A, then create a global account for
User1 with Monitor access.
C. Create a global account with Monitor access on storage system A, then modify the account policy to
allow User1 to administer only storage system A.
D. Create a global account with Monitor access on the master node, then have User1 log in to storage
system A using the local default manager account.
Answer: B
Dell DC0-261 DC0-261 DC0-261
NO.19 How are the LUNs for the Write Intent Log (WIL) configured?
A. WIL LUNs are configured automatically.
B. After manually binding the LUNs, the WIL is automatically configured.
C. WIL LUNs must be manually bound and allocated on a per-array basis.
D. WIL LUNs must be manually bound and allocated on one array. The WIL is then automatically
replicated to the other array.
Answer: C
Dell DC0-261자격증 DC0-261 DC0-261시험문제
NO.20 Which two states can a clone LUN be in before it can be fractured? (Choose two.)
A. consistent
B. synchronizing
C. synchronized
D. reverse out-of-sync
Answer: AC
Dell인증 DC0-261인증 DC0-261시험문제 DC0-261
ITexamdump의 74-325덤프의 VCE테스트프로그램과 3107덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 BAS-004시험에 대비한 고품질 덤프와 1Z0-807시험 최신버전덤프를 제공해드립니다. 최고품질 00M-622시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기