ITExamDump의 Microsoft인증 MB7-514덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 Microsoft인증 MB7-514덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 Microsoft인증 MB7-514로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.
한번에Microsoft인증70-291시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.
ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Microsoft MB2-701인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft MB2-701관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Microsoft MB2-701자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Microsoft MB2-701인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.
Microsoft인증70-291시험덤프공부자료는ITExamDump제품으로 가시면 자격증취득이 쉬워집니다. ITExamDump에서 출시한 Microsoft인증70-291덤프는 이미 사용한 분들에게 많은 호평을 받아왔습니다. 시험적중율 최고에 많은 공부가 되었다고 희소식을 전해올때마다 ITExamDump는 더욱 완벽한Microsoft인증70-291시험덤프공부자료로 수정하고기 위해 최선을 다해왔습니다. 최고품질으Microsoft인증70-291덤프공부자료는ITExamDump에서만 찾아볼수 있습니다.
시험 이름: NAV 5.0 C/SIDE Introduction
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 MB7-514교재
100% 합격율 보장
Q&A: 104 문항 MB7-514시험문제
업데이트: 2014-05-07
MB7-514교재: >>펼쳐보기
시험 이름: Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 70-291 Dump
100% 합격율 보장
Q&A: 260 문항 70-291 dump
업데이트: 2014-05-07
70-291 Dump: >>펼쳐보기
시험 이름: Extending Microsoft Dynamics CRM 2013
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 MB2-701덤프
100% 합격율 보장
Q&A: 90 문항 MB2-701인증덤프
업데이트: 2014-05-07
MB2-701덤프: >>펼쳐보기
ITExamDump 에서는 최선을 다해 여러분이Microsoft 70-291인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서Microsoft 70-291덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로Microsoft 70-291인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.
70-291 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-291.html
NO.1 Active Screen
You are the network administrator for your company.The network consists of a single Active Directory
domain.The relevant portion of the network is shown in the exhibit.(Click the Exhibit button.)
You need to configure a server named Server1 to use a valid static IP configuration.You need to enable
Server1 to
communicate with all hosts on the network and on the Internet.You want Server1 to query the DNS server
on the local subnet for name resolution.You also want to configure redundancy for name resolution.
What should you do?
To answer, configure the correct options in the dialog box.Drag the appropriate IP address or addresses
and the appropriate subnet mask or masks to the appropriate location or locations in the dialog box.
Answer:
NO.2 131.107.12.0/24
Answer
:
2.You are the network administrator for your company.All servers run Windows Server 2003. All servers
are configured with static IP addresses.All client computers run Windows XP Professional.All client
computers are configured as DHCP clients.
The company has a main office and one branch office.The offices are separated by a router.A DHCP
server is deployed in each office.
One of the DHCP servers shuts down unexpectedly.It takes four hours to repair the server.During that
time, several mobile users connect their portable computers to the network and report that they cannot
connect to shared resources on the network.
After the server is repaired, you create a new scope on each DHCP server that includes IP addresses for
the other office.You activate the scopes.
You test the new DHCP configuration by shutting down the DHCP server in the main office.You find out
that the client computers in the main office are not receiving IP addresses from the DHCP server in the
branch office. You need to ensure that when the DHCP server in one office fails, the client computers will
receive a correct IP
address configuration from the DHCP server in the other office.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Configure the router between the offices to forward BOOTP broadcasts.
B.Configure the DHCP server in each office with a DHCP scope that includes the same IP addresses as
the DHCP server in the other office.Activate the scope.
C.Configure the DHCP server in each office with an additional network adapter.Connect each new
network adapter to the local network.Assign an IP address from the other office's network to each new
network adapter.
D.Install and configure a DHCP relay agent in each office.
Answer: DA
Microsoft IT자격증시험자료 70-291 최신덤프 70-291 IT덤프 70-291 덤프
3.You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The network contains a Web server named Server1 that runs IIS 6.0 and hosts a secure Web site.The
Web site is accessible from the intranet, as well as from the Internet.All users must authenticate when
they connect to Server1.
All users on the Internet must use a secure protocol to connect to the Web site.Users on the intranet do
not need to use a secure protocol.
You need verify that all users are using a secure protocol to connect to Server1 from the Internet.
What are two possible ways to achieve this goal? (Each correct answer presents a complete
solution.Choose two.)
A.Monitor the events in the application log on Server1.
B.Monitor the events in the security log on Server1.
C.Monitor the Web server connections on Server1 by using a performance log.
D.Monitor network traffic to Server1 by using Network Monitor.
E.Monitor the IIS logs on Server1.
Answer: ED
Microsoft 시험문제 70-291 교재 70-291 인증덤프 70-291 시험정보
4.You are the administrator of an Active Directory domain.All servers run Windows Server 2003. All client
computers run Windows XP Professional.All computers are members of the domain.
The Secure Server (Require Security) IPSec policy is assigned to a file server named Server6. The policy
is configured as shown in the exhibit.(Click the Exhibit button.)
Users report that they cannot access shared folders on Server6. Users were able to access shared
folders on
Server6 prior to the implementation of the IPSec policy.
You need to ensure that all client computers in the domain can access the shared folders on Server6. You
must ensure that all communications between client computers and Server6 be encrypted.
What should you do?
A.On Server6, enable the All ICMP Traffic IP Security rule in the properties of the Secure Server (Require
Security) IPSec policy.
B.On Server6, enable the <Dynamic> IP Security rule in the properties of the Secure Server (Require
Security)
IPSec policy.
C.On all client computers, assign the Client (Respond Only) IPSec policy.
D.On all client computers, install an IPSec communication certificate in the local machine store.
Answer: C
Microsoft 시험자료 70-291 PDF 70-291 시험
5.You are a network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003.
The company has a main office and one branch office.The perimeter networks for each office are
configured as shown in the exhibit.(Click the Exhibit button.)
You configure an L2TP/IPSec VPN tunnel between Server1 and Server2. You also configure and assign
an IPSec
policy named RASIPSec that requires secure communications.
You need to ensure that no unsecured traffic from the Internet reaches the internal network through this
VPN.You
also need to ensure that access to the VPN servers from their respective internal networks is not
disrupted. What should you do?
A.Configure input and output L2TP/IPSec packet filters on the internal interfaces of Server1 and Server2.
B.Configure input and output L2TP/IPSec packet filters on the external interfaces of Server1 and Server2.
C.In the properties of RASIPSec, edit the All IP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
D.In the properties of RASIPSec, edit the All ICMP Traffic IP Filter list to include the IP addresses for only
Server1 and Server2.
Answer: B
Microsoft 덤프 70-291 자격시험 70-291 덤프 70-291 강좌
6.You are the administrator of an Active Directory domain.The network contains a Windows Server 2003
domain controller named Server1.
Users report that they experience intermittent delays when they log on to Server1. Administrators report
that replication attempts between Server1 and other domain controllers are occasionally delayed.
You need to verify the cause of the intermittent connection delays to Server1. You also need to find out
whether the problem is related to a hardware deficiency on Server1. You need to track these delays over
a period of one day.
What should you do first?
A.Run the netdiag /verbose command to perform a network diagnostic test on Server1.
B.Run the replmon command to view the Active Directory replication status on Server1.
C.Use Network Monitor to view the network traffic packet contents between Server1 and all other
computers.
D.Create a System Monitor counter to track the queue lengths on the network adapter on Server1.
Answer: D
Microsoft 시험 70-291 인증 70-291 시험문제 70-291 70-291 최신버전덤프 70-291 강좌
NO.3 You are the administrator of a Windows Server 2003 computer named Server1. Server1 is a domain
member server that has the DNS service installed.
Server1 is configured with two network interfaces named NIC1 and NIC2. Routing is not enabled between
the two network interfaces.NIC1 and NIC2 are configured as shown in the following table.
Resources on the preproduction network segment use the same fully qualified domain names (FQDNs)
as resources in the production network.The TCP/IP properties on client computers in the preproduction
environment are controlled by individual testers.
You need to ensure that the users in the preproduction environment cannot resolve FQDNs from the
production network.You want to accomplish this goal by using the DNS console on Server1.
What should you do?
A.Configure the interfaces properties on Server1 to listen on 192.168.2.10 only.
B.Configure the forwarders on Server1 to refer requests to 192.168.3.2.
C.Configure Server1 to disable recursion.
D.Configure Server1 to disable round robin.
Answer: A
Microsoft 최신덤프 70-291 시험문제 70-291 자격증시험 70-291 자격증시험 70-291 dump
NO.4 You are the network administrator for your company.The network consists of a single subnet.A
Windows
Server 2003 computer named Server1 functions as a DHCP server.
Server1 leases IP addresses in the 10.1.1.0/24 range to desktop client computers.There are 12 client
reservations for other servers and network printers.You have configured several detailed scope and
server options. If Server1 fails, you want to have a contingency plan that will allow you to use a domain
controller named DC2 as a DHCP server as quickly as possible.You install DHCP on DC2 without any
configuration and stop the DHCP
Server service.
You want to list the tasks that are required to back up Server1 and the tasks that are required to restore
the backup to DC2. A backup age of 24 hours or less is acceptable.
If Server1 fails, which set of tasks is required to enable DC2 to replace Server1 as the DHCP server?
A.On Server1: Schedule the Backup utility to back up the System State data to tape every 24 hours.
On DC2: Perform a non-authoritative System State restore.Using the Services console, start the DHCP
Server
service.Authorize DHCP.Reconcile the database.
B.On Server1: Use the Backup utility to schedule a tape backup of the DHCP database every 24 hours.
On DC2: Restore the tape backup of the DHCP database to a folder.Using the DHCP console, restore the
backup from the same folder.From the command prompt, type net start dhcpserver.Authorize DHCP.
C.On Server1: Schedule the Backup utility to back up the System State data to tape every 24 hours.
On DC2: Perform an authoritative System State restore.Manually re-create the server and scope options
that were on Server1. From a command prompt, type net start dhcpserver.Authorize DHCP.
D.On Server1: Use the DHCP console to perform a DHCP backup every 24 hours.Copy the backup on a
network share that is accessible by DC2.
On DC2: Copy the backup to a local folder.Using the DHCP console, restore the backup from the local
folder.From a command line, type net start dhcp.Authorize DHCP.Re-create the 12 client reservations.
Answer: B
Microsoft 70-291 기출문제 70-291 덤프자료
NO.5 You are the network administrator for your company.The network consists of a single Active Directory
domain.All servers run Windows Server 2003. All client computers run Windows XP Professional.
You install Windows Server Update Services (WSUS) on a network server named Server1. When you
attempt to synchronize Server1 with the Windows Update servers, you receive an error message.You
open Internet Explorer and verify that you can communicate with an external Web site by using the proxy
server.
You need to ensure that Server1 can communicate with the Windows Update servers.
What should you do on Server1?
A.Restart the IIS administration tool.
B.Configure the Internet Explorer settings to bypass the proxy server.
C.In the WSUS options, configure authentication to the proxy server.
D.Install the ISA Firewall Client.
Answer: C
Microsoft 시험후기 70-291 자격증 70-291 dump 70-291 Dumps 70-291 교재 70-291 IT덤프
NO.6 131.107.10.0/24
NO.7 You are the network administrator for your company.The network consists of a single Active Directory
domain.The domain contains 35 Windows Server 2003 computers; 3,000 Windows XP Professional
computers; and 2,000 Windows 2000 Professional computers.
Windows Server Update Services (WSUS) is installed on a server named Server1. The necessary Group
Policy object (GPO) is configured.
You need to confirm whether all computers in the domain have received all approved updates from
Server1.
What should you do on Server1?
A.Install and configure Urlscan.exe.
B.At the command prompt, type gpresult /scope COMPUTER.
C.Open the WSUS console.Run the Status of Computers report.
D.Open the WSUS console.Run the Synchronization Results report.
Answer: C
Microsoft 70-291 IT국제자격증 70-291 70-291 기출문제
NO.8 Drag drop
You are the network administrator for a Web hosting company.All servers run Windows Server 2003. All
client computers run Windows XP Professional.
Your company is assigned the following IP address ranges by the ISP:
>131.107.10.0 through 131.107.10.255
>131.107.11.0 through 131.107.11.255
The company's data center contains 400 Windows Server 2003 computers and consists of two subnets
named subnet A and subnet B.Subnet A contains 200 servers and uses the 131.107.10.0 network
address.Subnet B also contains 200 servers and uses the 131.107.11.0 network address.All server IP
addresses are assigned by DHCP.All computers in the data center have valid Internet-accessible IP
addresses.
As a result of a corporate acquisition, 200 additional servers will be added to your company's data center
within one month.The new servers will be placed on the network segment that maps to subnet A.The
existing router does not have the capacity for an additional subnet, and the budget does not allow the
purchase of a new router.You will
need to add the additional servers to the existing subnet A.The ISP assigns you the additional IP address
range 131.107.12.0 through 131.107.12.255.
You need to change the IP addressing scheme to accommodate all required servers in subnet A and
subnet B.You are authorized to make any necessary changes.
The diagram in the work area shows the network configuration and the planned number of servers for
each subnet.
Which IP address should be assigned to each subnet?
To answer, drag the appropriate IP address or addresses to the correct locations in the work area.
IP address IP Addresses
1> 131.107.10.0/23
댓글 없음:
댓글 쓰기