제일 빠른 시일내에 제일 간단한 방법으로Juniper인증 JN0-521시험을 패스하는 방법이 없냐구요? ITExamDump의Juniper인증 JN0-521덤프를 공부하시면 가능합니다. ITExamDump의Juniper인증 JN0-521덤프는 많은 분들이 검증한 가장 유력한Juniper인증 JN0-521시험공부자료입니다. 덤프의 문제만 기억하시면 패스는 문제없기에 제일 빠른 시일내에 시험을 패스하여 자격증 취득이 가능합니다.
Pass4Tes가 제공하는 제품을 사용함으로 여러분은 IT업계하이클래스와 멀지 않았습니다. Pass4Tes 가 제공하는 인증시험덤프는 여러분을Juniper인증JN0-521시험을 안전하게 통과는 물론 관연전업지식장악에도 많은 도움이 되며 또한 우리는 일년무료 업뎃서비스를 제공합니다.
인터넷에는Juniper인증 JN0-521시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Juniper인증 JN0-521공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Juniper인증 JN0-521덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.
시험 번호/코드: JN0-521
시험 이름: Juniper (FWV.Associate (JNCIA-FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 119 문항
업데이트: 2013-12-15
IT인증자격증은 여느때보다 강렬한 경쟁율을 보이고 있습니다. Juniper 인증JN0-521시험을 통과하시면 취직 혹은 승진이나 연봉협상에 많은 도움이 되어드릴수 있습니다. Juniper 인증JN0-521시험이 어려워서 통과할 자신이 없다구요? ITExamDump덤프만 있으면 이런 고민은 이제 그만 하지않으셔도 됩니다. ITExamDump에서 출시한 Juniper 인증JN0-521덤프는 시장에서 가장 최신버전입니다.
JN0-521 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-521.html
NO.1 Click the Exhibit button.
In the exhibit, which interface would be used to forward traffic to host 1.1.7.5?
A.e0/1
B.e0/2
C.e0/3
D.e0/4
Answer: C
Juniper JN0-521 JN0-521자격증
NO.2 Which statement accurately describes the "config rollback" feature?
A.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a previously saved
configuration file from flash.
B.The "config rollback" feature is enabled by default, it allows the administrator to re-apply a previously
saved configuration file from flash.
C.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a locked
configuration file from a separate area in flash.
D.Once the "config rollback" feature is enabled, it allows the administrator to revert to the prior ScreenOS
image or configuration file in the event an upgrade operation aborts.
Answer: C
Juniper dumps JN0-521 dump JN0-521 dump
NO.3 A ScreenOS firewall has the correct interfaces addressed and active. A policy is written allowing
interzone FTP traffic from a directly connected client. But the traffic does not cross the firewall from the
client to the server.
What is the most likely problem with the firewall?
A.The ScreenOS firewall has no physical connection to the FTP server.
B.The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C.The ScreenOS firewall does not have a route defined to the FTP servers' subnet.
D.The ScreenOS firewall does not have a route defined to the FTP clients subnet.
Answer: C
Juniper JN0-521 JN0-521인증
NO.4 Click the Exhibit button.
In the exhibit, which two forms of address translation would have generated the output shown? (Choose
two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer: BC
Juniper pdf JN0-521 JN0-521 JN0-521기출문제 JN0-521시험문제 JN0-521인증
NO.5 When changes are made to the running config during a WebUI management session, to what external
hardware component can the changes be saved?
A.FTP server
B.TFTP server
C.PC local disk
D.Compact Flash Card
Answer: C
Juniper dumps JN0-521 JN0-521 JN0-521덤프 JN0-521
NO.6 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer: D
Juniper시험문제 JN0-521 JN0-521 dumps JN0-521덤프 JN0-521기출문제
NO.7 What will change the root admin password?
A.set admin password
B.set root-admin password
C.set admin password
D.set admin user password
Answer: A
Juniper최신덤프 JN0-521 dumps JN0-521자격증 JN0-521
NO.8 Which statement is correct regarding administrator privileges?
A.Any administrator can change their privileges on an as-needed basis.
B.Administrator privileges can only be established and changed by the root administrator.
C.Administrator privileges can be established and changed by the root and all-privilege administrator.
D.Administrator privileges can only be established by the root and can be changed by the root and
all-privilege administrator.
Answer: B
Juniper dumps JN0-521덤프 JN0-521 dump JN0-521 dump
NO.9 Telnet management has been enabled on an interface in the untrust zone.
What else should be completed to limit telnet access to the ScreenOS device from trusted management
PCs?
A.Define a permitted IP address.
B.Define a policy from trust to untrust.
C.Define a trusted IP in the address table.
D.Define a manage IP address on this interface.
Answer: A
Juniper dump JN0-521 JN0-521
NO.10 What is the purpose of the "Manage-IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which device is allowed to manage the ScreenOS device.
C.It is the address that an external device uses to gain management access to a ScreenOS device.
D.It defines a list of device addresses that can manage the ScreenOS device without being authenticated
prior to session establishment.
Answer: C
Juniper기출문제 JN0-521 dumps JN0-521최신덤프 JN0-521자료
NO.11 Which process describes how an addressed physical interface is moved into a Layer 2 zone?
A.Place the required interface into the VLAN zone.
B.Place the required interface into L2 zones such as V1-Trust, V1-Untrust
C.Remove the interface from the L3 zone such as Trust and place it into a L2 zone such as V1-Trust
D.Remove the address from the interface, remove the interface from the L3 zone, and then place
interface in the L2 zone.
Answer: D
Juniper시험문제 JN0-521인증 JN0-521 pdf JN0-521
NO.12 By default, where are changes stored when a save command is issued from the CLI during a
management session?
A.NVRAM
B.internal flash
C.PCMCIA card
D.Compact Flash Card
Answer: B
Juniper인증 JN0-521시험문제 JN0-521자료 JN0-521 dumps JN0-521 JN0-521 dump
NO.13 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer: A
Juniper JN0-521 JN0-521인증 JN0-521최신덤프
NO.14 When managing a ScreenOS device using the WebUI and performing an image upgrade, from which
hardware component will the ScreenOS image be loaded?
A.TFTP server
B.PC local disk
C.internal flash
D.Compact Flash Card
Answer: B
Juniper JN0-521 JN0-521 dumps JN0-521최신덤프
NO.15 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.NVRAM
B.TFTP server
C.internal flash
D.PCMCIA card
Answer: C
Juniper인증 JN0-521 JN0-521 JN0-521자료
NO.16 You are looking at the event log of the responding device and it says,
"Rejected an initial Phase 1 packet from an unrecognized peer gateway"
What are three likely reasons for the failure? (Choose three.)
A.The peer ID is misconfigured.
B.The default gateway is missing.
C.The preshare keys are mismatched.
D.The gateway address is misconfigured.
E.The outgoing interface is misconfigured.
Answer: ADE
Juniper JN0-521 JN0-521 pdf JN0-521 dumps
NO.17 Which command is used when configuring web management on the VLAN1 interface for a client
connected to an e3 interface in the DMZ zone?
A.set int eth3 manage web
B.set zone v1-dmz manage web
C.set int dmz zone manage web
D.set int VLAN1 zone dmz manage web
Answer: B
Juniper최신덤프 JN0-521자료 JN0-521
NO.18 When configuring a firewall in a critical environment where a local backup configuration is quickly
needed, what should be completed on a periodic basis?
A.Execute exec config rollback.
B.Execute save config to last-known-good.
C.Execute save regularly or create a script that does this.
D.Execute save software from flash to pcmcia .
Answer: B
Juniper JN0-521 JN0-521최신덤프 JN0-521자격증
NO.19 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI
management.
Which sequence of steps must be performed to make the interface operational at the end of the
configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and telnet services.
B.Assign the interface to a zone, define the IP address, accept default management services.
C.Assign the interface to a virtual router, define the IP address, enable Web and telnet services.
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default
management services.
Answer: A
Juniper JN0-521 JN0-521 JN0-521자료
NO.20 Which ScreenOS WebUI button reorders policies?
A.Shift
B.Move
C.Reorder
D.Transfer
Answer: B
Juniper JN0-521 JN0-521 JN0-521
NO.21 Which type of NAT is performed when you implement interface-based NAT?
A.source IP address translation
B.destination IP address translation
C.source IP and port address translation
D.destination IP and port address translation
Answer: C
Juniper JN0-521최신덤프 JN0-521 dump
NO.22 In the packet forwarding decision process, how is the second packet handled differently than the first
in a series of allowed interzone packets?
A.The second packet causes an ARP query.
B.The second packet is checked against the policy table.
C.The second packet is forwarded without a sanity check.
D.The second packet is forwarded without checking the route table.
Answer: D
Juniper JN0-521 JN0-521 JN0-521 JN0-521
NO.23 When a firewall receives the first packet in a series, what will it immediately do?
A.Check its route table.
B.Check its session table.
C.Determine if traffic is crossing zones.
D.Verify that it is not malformed or a fragment.
Answer: D
Juniper인증 JN0-521 pdf JN0-521 JN0-521 pdf
NO.24 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer: AB
Juniper JN0-521최신덤프 JN0-521 JN0-521
NO.25 In the command, save config from tftp 1.1.7.250 abcd.cfg merge, which function does the merge
parameter specify?
A.The config file from the TFTP server will replace the configuration in RAM.
B.The config file from the TFTP server will replace the startup configuration file in internal flash.
C.The merge parameter is not valid for TFTP files, it is only valid for configuration files stored in internal
flash.
D.The config file from the TFTP server will be combined with the configuration file in RAM and the
combined result will be saved in internal flash.
Answer: D
Juniper최신덤프 JN0-521 pdf JN0-521자료 JN0-521자격증 JN0-521 dumps
NO.26 Which two statements are true in regards to a ScreenOS firewall in transparent mode? (Choose two.)
A.VPNs can terminate to the VLAN1 interface IP address.
B.Static routes must be configured if multiple virtual routers are going to be used.
C.It can be installed in a network without the requirement to reconfigure IP addressing schemes.
D.You must use the console port to manage the device as you cannot manage the device using an
Ethernet port.
Answer: AC
Juniper JN0-521자격증 JN0-521 JN0-521 JN0-521기출문제
NO.27 An operational firewall needs a configuration loaded and executed while it is passing user data.
Which CLI command will perform this process without interrupting traffic?
A.save config from tftp 1.1.7.250 15June06.cfg to flash
B.save config from tftp 1.1.7.250 15June06.cfg to ram
C.save config from tftp 1.1.7.250 15June06.cfg merge
D.save config from tftp 1.1.7.250 15June06.cfg to flash
Answer: C
Juniper최신덤프 JN0-521 JN0-521자격증 JN0-521인증
NO.28 When performing an image upgrade using the CLI, which three locations would be a source for this
image? (Choose three.)
A.FTP server
B.TFTP server
C.internal flash
D.PC local disk
E.Compact Flash Card
Answer: BCE
Juniper최신덤프 JN0-521 JN0-521최신덤프 JN0-521자격증
NO.29 Which command would you run to check IPSec Phase 1 active status?
A.get sa
B.get event 427
C.get sa active
D.get ike cookie
Answer: D
Juniper인증 JN0-521 JN0-521 JN0-521
NO.30 A ScreenOS firewall is running in transparent mode. The firewall receives a packet which has no entry
in its forwarding table.
What will the firewall do?
A.Flood out all ports.
B.Check its route table for interzone destination.
C.Perform a policy lookup to determine the interfaces to which the source address is permitted, and flood
the packet out of those interfaces.
D.Perform a policy lookup to determine the zones to which the source address is permitted, and flood the
packet out the interfaces bound to those zones.
Answer: D
Juniper JN0-521자격증 JN0-521 JN0-521인증 JN0-521 JN0-521
ITexamdump의 70-332덤프의 VCE테스트프로그램과 1Z1-061덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-155시험에 대비한 고품질 덤프와 642-980시험 최신버전덤프를 제공해드립니다. 최고품질 E20-891시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기