여러분은 먼저 우리 ITExamDump사이트에서 제공되는HP인증HP0-Y43시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에HP인증HP0-Y43시험을 패스하도록 하겠습니다. 만약HP인증HP0-Y43시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.
ITExamDump에서는HP 인증HP0-Y43시험대비덤프를 발췌하여 제공해드립니다. HP 인증HP0-Y43시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인HP 인증HP0-Y43시험대비덤프로HP 인증HP0-Y43시험준비공부를 해보세요. 통과율이 100%입니다.
현재HP HP0-Y43인증시험을 위하여 노력하고 있습니까? 빠르게HP인증 HP0-Y43시험자격증을 취득하고 싶으시다면 우리 ITExamDump 의 덤프를 선택하시면 됩니다,. ITExamDump를 선택함으로HP HP0-Y43인증시험패스는 꿈이 아닌 현실로 다가올 것입니다,
ITExamDump의HP인증 HP0-Y43덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의HP인증 HP0-Y43덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? HP인증 HP0-Y43덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.
It 업계 중 많은 분들이 인증시험에 관심이 많은 인사들이 많습니다.it산업 중 더 큰 발전을 위하여 많은 분들이HP HP0-Y43를 선택하였습니다.인증시험은 패스를 하여야 자격증취득이 가능합니다.그리고 무엇보다도 통행증을 받을 수 잇습니다.HP HP0-Y43은 그만큼 아주 어려운 시험입니다. 그래도HP HP0-Y43인증을 신청하여야 좋은 선택입니다.우리는 매일매일 자신을 업그레이드 하여야만 이 경쟁이 치열한 사회에서 살아남을 수 있기 때문입니다.
ITExamDump는 여러분이 빠른 시일 내에HP HP0-Y43인증시험을 효과적으로 터득할 수 있는 사이트입니다.HP HP0-Y43인증 자격증은 일상생활에 많은 개변을 가져올 수 있는 시험입니다.HP HP0-Y43인증 자격증을 소지한 자들은 당연히 없는 자들보다 연봉이 더 높을 거고 승진기회도 많아지며 IT업계에서의 발전도 무궁무진합니다.
시험 번호/코드: HP0-Y43
시험 이름: HP (Implementing HP Network Infrastructure Solutions Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 62 문항
업데이트: 2014-01-16
우리ITExamDump 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 시험대비 자료들과HP HP0-Y43인증시험의 완벽한 문제와 답들입니다. 그리고 우리ITExamDump에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 우리에 믿음을 드리기 위하여HP HP0-Y43관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼수 있게 제공합니다.
HP0-Y43 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y43.html
NO.1 Which switch is best suited to act at the edge of a medium to large HP FlexFabric solution?
A. 10500
B. 5500
C. 9500
D. 5830
Answer: D
HP pdf HP0-Y43 HP0-Y43
NO.2 A customer requires an HP FlexCampus solution with a core that scales to 40/100G. Which HP switch
fabric meets this need?
A. the 7500's CLOS switch fabric
B. the 10500's CLOS switch fabric
C. the 7500's crossbar switch fabric
D. the 10500's crossbar switch fabric
Answer: B
HP HP0-Y43기출문제 HP0-Y43 HP0-Y43자료
NO.3 View the exhibit.
The exhibit shows a network with HP 5400 zl and 8200 zl switches throughout the core and edge. What is
one advantage of implementing routing on edge switches?
A. Typically, it is easier to implement user-based VLAN assignments.
B. The topology has higher redundancy because edge switches can take over routing roles when
necessary.
C. Typically, the network can use fewer total VLANs when edge switches implement routing.
D. Typically, it is easier to ensure that routed links between edge and core switches are fully utilized.
Answer: D
HP HP0-Y43 dump HP0-Y43 HP0-Y43 HP0-Y43
NO.4 View the exhibits.
Exhibit 1
The frame has these characteristics:
-VLANID = 3
-802.1p = 3
-DSCP=32
-Source IP address = 10.1.1.5
Click here for Exhibit 2
The frame shown in Exhibit 1 arrives on an HP 5800 switch's GigabitEthernet port 1/0/1. QoS maps are at
their default settings. Based on the configuration shown in Exhibit 2, to which queue is the outbound
packet assigned?
A. 2
B. 3
C. 4
D. 5
Answer: D
HP HP0-Y43 HP0-Y43자료
NO.5 A company has a service level agreement (SLA) with its service provider. The SLA specifies a 2 Mbps
committed information rate (CIR) and 20 KB committed burst size (CBS). Lately, during peak usage times,
the company has been experiencing brief periods of poor performance on its external connection
(GigabitEthernet port 2/0/1 on an HP 5800 switch).
How can the network administrator configure the Comware switch to address this problem?
A. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a QoS policy that maps the classifier to the action and apply this policy as
an inbound policy on port GigabitEthernet 2/0/1.
B. Enable Strict Priority (SP) scheduling on port GigabitEthernet 2/0/1 and ensure that all inbound traffic is
marked with the correct priority.
C. Configure generic traffic shaping (GTS) on the GigabitEthernet port 2/0/1, setting the CIR to 2 Mbps
and the CBS to 20 KB.
D. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a OoS policy that maps the classifier to the action and apply this policy as
an outbound policy on port GigabitEthernet 2/0/1.
Answer: C
HP덤프 HP0-Y43 HP0-Y43 HP0-Y43 HP0-Y43 pdf
NO.6 A network includes a mix of IGMPv2 and IGMPv3 endpoints and must support the following source
specific multicasting applications:
-Source: 10.1.4.2 and Group: 232.0.5.5
-Source: 10.1.4.12 and Group 232.0.6.6
The network is already implementing PIM-SM and IGMPv3. In order to support these applications, the HP
10500 switches that act as routers for the endpoints in question must support another feature. Which step
must the network administrator perform on each of these switches?
A. Create an SSM policy that includes 232.0.5.5 and 232.0.6.6 within its range
B. Enable IGMPv2 backward compatibility mode
C. Configure two SSM maps, each of which mapsa source to its multicast group
D. Enable PIM SSM on the interfaces that connect to the endpoints
Answer: C
HP HP0-Y43덤프 HP0-Y43덤프 HP0-Y43
NO.7 View the exhibit.
A network administrator wants to configure an HP 5800 switch to place all incoming traffic on the
GigabitEthernet 1/0/1 port in priority queue 3. However, one exception applies. All traffic incoming on that
port that is destined to UDP port 55555 should be forwarded in priority queue 4 and marked with DSCP
32.
Based on the current configurations shown in the exhibit, which further steps must the network
administrator perform? (Select two.)
A. Configure port GigabitEthernet 1>0/1 to trust DSCP
B. Apply QoS policy Policy1 as on inbound policyon port GigabitEthernet 1/0/l
C. Apply QoS policy Policy2 as on inbound policyon port GigabitEthernet 1/0/1
D. Create a OoS Ip-dscp mapthat maps Ip value 4 to DSCP02
E. Undo OoS trust on port GigabitEthernet 1/0/1
Answer: B,E
HP HP0-Y43 HP0-Y43시험문제 HP0-Y43덤프 HP0-Y43
NO.8 How can a high density of ports and high throughput at the core of an HP FlexNetwork save customers
money?
A. Intelligence is offloaded from the edge switches, enabling customers to save money on the most
numerous switches in their solutions.
B. The customer can combine the data center and campus LAN core into a single entity, reducing power
and cooling costs.
C. The customer no longer needs to deploy modular switches at the distribution level and the edge,
deploying more cost-effective stackable switches instead.
D. The architecture can be simplified, eliminating expensive distribution devices and reducing power and
cooling costs.
Answer: D
HP HP0-Y43 HP0-Y43 HP0-Y43
NO.9 A company has a network that includes HP 5800 and 12500 switches. Usage demands on the
company's FTP servers have increased, causing performance issues during peak usage times. While
analyzing link utilization, the network administrator noticed that the most heavily utilized links experience
bursts of congestion, causing them to drop traffic. The links then experience brief periods of low utilization
followed by another burst of congestion. This pattern continues periodically throughout the peak utilization
time.
What should the network administrator do to attempt to create a more efficient traffic pattern on these
links?
A. Configure an outbound traffic policing policy on the ports in question, setting the CIR at about sixty
percent of the ports' capacity and the PIR at about eighty percent.
B. Apply Weighted Fair Queuing (WFQ) or Weighted Round Robin (WRR) scheduling in preference to
Strict Priority (SP) scheduling on the ports in question.
C. Configure inbound traffic policing policies on ports at the core, setting the CIR at about sixty percent of
the ports' capacity and the PIR at about eighty percent. Apply outbound generic traffic shaping (GTS) on
ports facing the core ports, setting the CIR equal to the CIR on the core ports.
D. Apply a WRED table to the ports in question, optionally adjusting the table values to drop lower priority
traffic first.
Answer: D
HP HP0-Y43 HP0-Y43 dump
NO.10 What is the role of neighbor solicitation (NS) messages in the autoconfiguration of an IPv6 address.?
A. An IPv6 node sends an NS message to inform a node undergoing autoconfiguration that it is already
using a particular address.
B. An IPv6 node sends an NS message for its tentative address to determine whether another node is
using it.
C. An IPv6 node sends an NS message for the global prefix to prompt other IPv6 nodes to advertise the
addresses that they are using on that prefix.
D. An IPv6 node sends an NS message to prompt an IPv6 router on the link to advertise the global
prefixes associated with the link immediately.
Answer: B
HP HP0-Y43 HP0-Y43
ITexamdump의 MB6-870덤프의 VCE테스트프로그램과 HP0-J60덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-155시험에 대비한 고품질 덤프와 200-120시험 최신버전덤프를 제공해드립니다. 최고품질 70-463시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기