근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. HP인증 HP2-K01시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이HP인증 HP2-K01시험을 한방에 패스하도록 실제시험문제에 대비한HP인증 HP2-K01덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
HP인증 HP2-K01시험은 IT인증자격증중 가장 인기있는 자격증을 취득하는 필수시험 과목입니다. HP인증 HP2-K01시험을 패스해야만 자격증 취득이 가능합니다. ITExamDump의HP인증 HP2-K01는 최신 시험문제 커버율이 높아 시험패스가 아주 간단합니다. HP인증 HP2-K01덤프만 공부하시면 아무런 우려없이 시험 보셔도 됩니다. 시험합격하면 좋은 소식 전해주세요.
ITExamDump에는HP HP2-K01인증시험의 특별한 합습가이드가 있습니다. 여러분은 많은 시간과 돈을 들이지 않으셔도 많은 IT관련지식을 배우실수 있습니다.그리고 빠른 시일 내에 여러분의 IT지식을 인증 받으실 있습니다. ITExamDump인증자료들은 우리의 전문가들이 자기만의 지식과 몇 년간의 경험으로 준비중인 분들을 위하여 만들었습니다.
IT인증자격증은 여느때보다 강렬한 경쟁율을 보이고 있습니다. HP 인증HP2-K01시험을 통과하시면 취직 혹은 승진이나 연봉협상에 많은 도움이 되어드릴수 있습니다. HP 인증HP2-K01시험이 어려워서 통과할 자신이 없다구요? ITExamDump덤프만 있으면 이런 고민은 이제 그만 하지않으셔도 됩니다. ITExamDump에서 출시한 HP 인증HP2-K01덤프는 시장에서 가장 최신버전입니다.
HP인증 HP2-K01시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. HP인증 HP2-K01인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. ITExamDump 의 HP인증 HP2-K01덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전HP인증 HP2-K01무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다.
시험 번호/코드: HP2-K01
시험 이름: HP (Servicing HP BladeSystem)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 126 문항
업데이트: 2014-03-13
HP HP2-K01인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. HP HP2-K01덤프는ITExamDump제품이 최고랍니다.
HP2-K01 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP2-K01.html
NO.1 Which utility allows you to easily install and provision one or many blade servers in an unattended,
automated fashion?
A. Virtual Install Disk
B. Rapid Deployment Pack (RDP)
C. ROM-Based Setup Utility (RBSU)
D. HP Systems Insight Manager (HP SIM)
Answer: B
HP HP2-K01 HP2-K01 HP2-K01인증
NO.2 Which item is required to power on and troubleshoot a single p-Class blade server that has been
removed from its enclosure?
A. Diagnostic Station and adapter
B. Server Blade Management Module
C. Integrated Lights-Out remote console
D. You cannot power on and troubleshoot a p-Class blade that has been removed from its
enclosure
Answer: A
HP dumps HP2-K01인증 HP2-K01 pdf HP2-K01인증 HP2-K01 HP2-K01
NO.3 Which c-Class BL series server blade supports 4 internal SAS drives?
A. BL460c
B. BL480c
C. BL685c
D. BL860c
Answer: B
HP HP2-K01 HP2-K01인증 HP2-K01 pdf HP2-K01
NO.4 If you suspect the hard drive or hard drive subsystem may be at fault in a system, which HP tools
can isolate the source of the problem? (Select two.)
A. Onboard Administrator
B. Array Diagnostics Utility (ADU)
C. ROM-Based Setup Utility (RBSU)
D. Insight Diagnostics Online Edition
E. Option ROM Configuration for Arrays (ORCA)
Answer: B,D
HP자격증 HP2-K01 dump HP2-K01 HP2-K01기출문제
NO.5 You are installing a new InifiniBand Mezzanine card into a customer's BL480c server blade. The
mezzanine card is installed into mezzanine slot 2.
Which interconnect location must the InifiniBand controller be installed into?
A. bays 3-4
B. bays 5-6
C. bays 7-8
D. Placement of the controller does not matter. The Onboard Administrator will properly map
theInifiniband mezzanine card to the installed Infiniband Interconnect.
Answer: B
HP인증 HP2-K01자격증 HP2-K01 dump
NO.6 How many BL30p servers can be supported by a fully populated 1U p-Class power enclosure?
A. 4
B. 8
C. 12
D. 16
Answer: D
HP dump HP2-K01 dumps HP2-K01자료 HP2-K01 HP2-K01자격증 HP2-K01
NO.7 Your customer requires software that will help keep HP software and drivers installed on c-Class
blade servers up-to-date. They want a low-cost solution.
What should you recommend to this customer? (Select two)
A. HP Client Manager
B. HP Virtualization Software
C. Version Control Agent (VCA)
D. Version Control Repository Manager (VCRM)
E. Vulnerability and Patch Management Pack (VPM)
Answer: C,D
HP HP2-K01인증 HP2-K01 HP2-K01
NO.8 Your customer has eight BL20p G3 servers all with Fibre Channel mezzanine cards. They also
have a GbE2 switch installed with a Brocade switch attached.
None of their servers can access external shared storage (MSA1500cs). What should you verify
first?
A. if the BL20p G3 has a 4Gb or fasterFibre Channel card
B. if the Brocade switch has an IP address assigned by DHCP
C. ifFibre Channel pass through is installed on the GbE2 switches
D. if Selective Storage Presentation (SSP) is enabled on the MSA1500cs
Answer: C
HP HP2-K01 dump HP2-K01최신덤프
NO.9 You are performing maintenance at a customer's site and they are booting an HP BladeSystem p-
Class server from a storage area network (SAN). You must configure the server with a virtual boot
device that enables the server to fetch boot-loading instructions from the SAN.
How is the virtual boot device presented to the host server?
A. as a Logical Unit Number (LUN) on the disk array
B. as a Pre-boot Execution Environment (PXE) NIC
C. as aFibre channel Host Bus Adapter (HBA) on the target server
D. as a Deployment Server database attached to the target server
Answer: A
HP시험문제 HP2-K01 HP2-K01자료 HP2-K01시험문제
NO.10 Which online tool can be utilized to plan the power requirements for an HP Integrity BL860c
Blade?
A. HP Part Surfer
B. HP Knowledge Base
C. HPBladeSystem Sizer
D. HP Power Analysis & Planner
Answer: C
HP HP2-K01기출문제 HP2-K01자료
NO.11 Which task of the HP Troubleshooting Methodology do you accomplish when performing Step 2?
A. Determine which subsystem could cause the problem.
B. Identify the steps necessary to implement each solution.
C. Identify the possible solution for each possible root cause.
D. Determine and use the most appropriate tools for each situation.
Answer: A
HP dumps HP2-K01 HP2-K01기출문제 HP2-K01 HP2-K01기출문제
NO.12 Some servers within a customer data center turn off because of overheating. You have an air
conditioning specification and want to compare this information with the amount of heat generated
by the servers.
Which HP tool provides this information?
A. Product Bulletin
B. Power Calculator
C. Data Center Sizer
D. Performance Quick Reference Tool (PQRT)
Answer: B
HP pdf HP2-K01 HP2-K01 HP2-K01인증 HP2-K01자격증
NO.13 A customer reports that an InfiniBand switch does not power on. What is a possible cause of this
problem?
A. Dynamic Power Saver is not activated on theInfiniBand switch.
B. A three-phase power system should be used withInfiniBand switches.
C. At least one server blade is not equipped with Host Channel Adapter (HCA) card.
D. The Onboard Administrator version firmware does not supportInfiniBand switches.
Answer: D
HP dumps HP2-K01 HP2-K01자료 HP2-K01 dump
NO.14 A customer wants to install five full-height blade servers into a c-Class enclosure that is running
N+N power supply redundancy mode.
How many power supplies are required to support this configuration?
A. 3
B. 4
C. 5
D. 6
Answer: D
HP자료 HP2-K01 HP2-K01
NO.15 What happens if a server blade is moved from an enclosure managed by Virtual Connect to an
enclosure that is not managed by Virtual Connect?
A. MAC address and WWNs must be changed manually for the server blade.
B. Local MAC addresses are automatically returned to the original factory defaults.
C. After boot, server blades will gain access to the network as soon as the server and interconnect
modules are ready.
D. The configuration of the server blade is automatically updated before it is allowed to power on
and connect to the network.
Answer: B
HP기출문제 HP2-K01 pdf HP2-K01 dumps HP2-K01 HP2-K01 pdf
NO.16 Which management functionality is provided by the Onboard Administrator? (Select two.)
A. manages shared power and cooling for the enclosure
B. provides management Ethernet fabric for the enclosure
C. provides HP SIM (System Insight Manager) functionality for Blade servers
D. activates Remote Deployment Pack (RDP) when an in-service server fails
E. automates the process of deploying server operating systems and software
Answer: A,B
HP자료 HP2-K01최신덤프 HP2-K01
NO.17 Your customer wants a solution that allows them to remotely deploy operating systems without
having to interact directly with each server blade or hiring additional IT staff.
Which product should they install to accomplish this goal?
A. HP Version Control Agent
B. HP Rapid Deployment Pack
C. HP Remote Deployment Utility
D. HP Vulnerability and Patch Management
E. HP Version Control Repository Manager
Answer: B
HP HP2-K01 HP2-K01시험문제 HP2-K01최신덤프 HP2-K01
NO.18 You work with an enclosure equipped with ten fans and sixteen half-height servers. Two fans
failed.
In which slots must you insert the remaining fans to keep all sixteen servers working?
A. 1, 2, 3, 4, 6, 7, 8, 9
B. 2, 3, 4, 5, 7, 8, 9, 10
C. 1, 2, 4, 5, 6, 7, 9, 10
D. 1, 2, 3, 4, 7, 8, 9, 10
Answer: C
HP HP2-K01 pdf HP2-K01
NO.19 Which HP remote application continuously monitors hardware and sends an alert to HP when an
error occurs?
A. HP Systems Insight Manager
B. Open Service Event Manager
C. Instant SupportEnterprise Edition
D. Integrated Management Log Viewer
Answer: C
HP dump HP2-K01덤프 HP2-K01시험문제 HP2-K01 dump
NO.20 Which GUI utility diagnoses system bottlenecks and is easily integrated with HP Systems Insight
Manager?
A. HP Control Tower for HPBladeSystem
B. HPProLiant Essentials Workload Management Pack
C. HPProLiant Essentials Performance Management Pack
D. HPProLiant Essentials Vulnerability and Patch Management Pack
Answer: C
HP HP2-K01 pdf HP2-K01시험문제 HP2-K01 HP2-K01자료
NO.21 Which processor types are offered on the BL460c? (Select two)
A. AMDOpteron Processor
B. Dual-Core Intel EM64T processor
C. Intel Itanium 2 Madison processor
D. Intel Itanium 2 Montecito processor
E. Quad-Core Intel EM64T processor
Answer: B,E
HP HP2-K01 HP2-K01시험문제
NO.22 Which HP StorageWorks arrays can be used with the HP BladeSystem c-Class? (Select two.)
A. MSA 20
B. MSA 30
C. MSA 500
D. MSA 1000
E. MSA 1500cs
Answer: D,E
HP기출문제 HP2-K01덤프 HP2-K01
NO.23 Which HP cooling technology uses power management to control CPU power state automatically
based on application demand?
A. Active Cool fans
B. Dynamic Power Saver
C. Modular Cooling System
D. ProLiant Power Regulator
Answer: D
HP최신덤프 HP2-K01 dump HP2-K01 HP2-K01
NO.24 What is the maximum number of DIMMs that can be installed into an HP Integrity BL860c Server
Blade?
A. 6
B. 8
C. 10
D. 12
E. 16
Answer: D
HP HP2-K01 pdf HP2-K01시험문제 HP2-K01 pdf
NO.25 During which portion of the HP Troubleshooting Methodology do you carefully observe and record
the results of each step including any error messages or changes in functionality?
A. Step 1 - Collect data
B. Step 3 - Develop the action plan
C. Step 4 - Execute the action plan
D. Step 6 - Implement preventative measures
Answer: C
HP덤프 HP2-K01 HP2-K01기출문제
NO.26 You need to update Integrated Lights-Outs (iLO) card firmware, but you do not have physical
access to the server.
How can you accomplish this task?
A. useiLO web interface
B. use System Software Manager
C. use Version Control Repository Manager (VCRM)
D. use Instant Support Enterprise Edition (ISEE) software
Answer: A
HP덤프 HP2-K01 HP2-K01자격증 HP2-K01 HP2-K01
NO.27 You installed new server blades into an HP BladeSystem c-Class enclosure.
How does the enclosure indicate if a server blade is not installed correctly?
A. The HPBladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the interconnect to power on.
D. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: D
HP HP2-K01 HP2-K01인증
NO.28 In which situation are qualified rack options covered by the HP BladeSystem c-Class Care Pack
services?
A. when the options are installed in the same rack
B. when the rack is fully populated with p-Class blades
C. when the options are used only with blade equipment
D. when the options are purchased with the c7000 enclosure
Answer: A
HP HP2-K01 dumps HP2-K01 dumps
NO.29 Which ProLiant Essentials Foundation Pack CD can run the Array Diagnostic Utility (ADU)?
A. Diagnostic CD
B. SmartStart CD
C. Management CD
D. Firmware Maintenance CD
Answer: B
HP자격증 HP2-K01 HP2-K01 HP2-K01 HP2-K01
NO.30 You added an interconnect switch in an HP BladeSystem c-Class and the switch does not power
up. What should you check? (Select three.)
A. interconnect type and location
B. position of the mezzanine cards
C. position of the power supplies in the enclosure
D. status of the first full-height server blade in the enclosure
E. enclosure and switch status in the Onboard Administrator
F. whether interconnect bay has been activated for the bay the switch is in
Answer: A,B,E
HP dumps HP2-K01인증 HP2-K01최신덤프 HP2-K01
ITexamdump의 642-980덤프의 VCE테스트프로그램과 M70-301덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-Z24시험에 대비한 고품질 덤프와 JN0-314시험 최신버전덤프를 제공해드립니다. 최고품질 000-196시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기