ITExamDump의 Microsoft인증 070-503-Csharp시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 Microsoft인증 070-503-Csharp시험덤프로 어려운 Microsoft인증 070-503-Csharp시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
Microsoft인증070-503-Csharp시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.Microsoft인증070-503-Csharp시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.Microsoft인증070-503-Csharp시험은 여러분이 it지식테스트시험입니다.
경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. Microsoft인증 070-503-Csharp시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게Microsoft인증 070-503-Csharp시험에서 고득점으로 패스하고 싶다면ITExamDump의Microsoft인증 070-503-Csharp덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.
현재 경쟁울이 심한IT시대에,Microsoft 070-503-Csharp자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리ITExamDump 에서 여러분은Microsoft 070-503-Csharp관련 학습지도서를 얻을 수 있습니다. 우리ITExamDump는 IT업계엘리트 한 강사들이 퍼펙트한Microsoft 070-503-Csharp문제집을 만들어서 제공합니다. 우리가 제공하는Microsoft 070-503-Csharp문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.
많은 분들이 고난의도인 IT관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 IT관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 IT관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 IT시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 IT관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.
시험 번호/코드: 070-503-Csharp
시험 이름: Microsoft (TS: MS.NET Frmwrk 3.5, Wndws Commun Fndtion App Dev)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2014-03-06
지금 사회에 능력자들은 아주 많습니다.it인재들도 더욱더 많아지고 있습니다.많은 it인사들은 모두 관연 it인증시험에 참가하여 자격증취득을 합니다.자기만의 자리를 확실히 지키고 더 높은 자리에 오르자면 필요한 스펙이니까요.070-503-Csharp시험은Microsoft인증의 중요한 시험이고 또 많은 it인사들은Microsoft자격증을 취득하려고 노력하고 있습니다.
070-503-Csharp 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-503-Csharp.html
NO.1 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will be hosted in a managed Console application.
You want to add endpoints to the service.
You need to ensure that all endpoints use the same base address.
Which code fragment should you use?
A. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {baseAddress });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
B. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {});
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
C. [ServiceContract]
public interface IMortgageService {
public class MortgageService : IMortgageService {
string baseAddress="http: //localhost:8888/MortgageService";
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
D. [ServiceContract(Namespace="http: //localhost:8888/MortgageService")]
public interface IMortgageService {
public class MortgageService : IMortgageService {
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
Answer: A
Microsoft 070-503-Csharp기출문제 070-503-Csharp덤프 070-503-Csharp
NO.2 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B
Microsoft 070-503-Csharp기출문제 070-503-Csharp 070-503-Csharp덤프
NO.3 5. You have successfully created two interfaces: IMyService and IMyServiceClient.
You need to ensure that the service is able to call methods from the client application by using the
IMyServiceClient interface.
Which code segment should you use?
A. [ServiceContract(CallbackContract=typeof(IMyServiceClient))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
B. [ServiceContract(CallbackContract=typeof(IMyService))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
C. [ServiceContract(SessionMode=SessionMode.Allowed)]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService : IMyServiceClient
{
...
}
public interface IMyServiceClient
{
...
}
D. [ServiceContract]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService
{
...
}
[ServiceContract]
public interface IMyServiceClient : ICommunicationObject
{
...
}
Answer: A
Microsoft 070-503-Csharp 070-503-Csharp dump 070-503-Csharp최신덤프
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder", Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D
Microsoft자료 070-503-Csharp 070-503-Csharp 070-503-Csharp
NO.4 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A
Microsoft최신덤프 070-503-Csharp시험문제 070-503-Csharp dump 070-503-Csharp pdf 070-503-Csharp pdf
NO.5 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
ø The service contract must have an operation contract named GetPerson that returns an object of type
Person.
ø The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C
Microsoft dumps 070-503-Csharp 070-503-Csharp자격증 070-503-Csharp 070-503-Csharp덤프
NO.6 smb.HttpGetUrl=mexAddress;
NO.7 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C
Microsoft인증 070-503-Csharp dump 070-503-Csharp dumps 070-503-Csharp 070-503-Csharp시험문제
NO.8 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Uri baseAddress=
02 new Uri ( http://localhost:8000/ExamService );
03 Uri mexAddress=new Uri("");
04 ServiceHost serviceHost=new ServiceHost(typeof(
05 ?ExamService), baseAddress);
06 ServiceMetadataBehavior smb=
07 serviceHost.Description.Behaviors.
08 Find<ServiceMetadataBehavior>();
09 if (smb != null)
10 {
11
12 }
13 else
14 {
15 smb=new ServiceMetadataBehavior();
16 serviceHost.Description.Behaviors.Add(smb);
NO.9 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment.
namespace MyServices
{
[ServiceContract()]
interface IManageOrders
{
...
}
}
The service metadata must be exposed at the relative address named meta.
You need to add an endpoint element to the app.config file of the service host.
Which code fragment should you add?
A. <endpoint address="meta" binding="wsHttpBinding"
contract="IManageOrders" />
B. <endpoint address="meta" binding="wsHttpBinding"
contract="MyServices.IMetadataExchange" />
C. <endpoint address="meta" binding="mexHttpBinding"
contract="IMetadataExchange" />
D. <endpoint address="meta" binding="mexHttpBinding"
contract="MyServices.IManageOrders" />
Answer: C
Microsoft dump 070-503-Csharp 070-503-Csharp 070-503-Csharp 070-503-Csharp pdf
NO.10 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You create the following service contract.
[ServiceContract]
public interface IMath
{
[OperationContract]
int Add(int num1, int num2);
}
You need to add an operation contract to perform the Add operation asynchronously.
Which operation contract should you use?
A. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2);
int EndAdd(IAsyncResult res);
B. [OperationContract]
int BeginAdd(int num1, int num2, AsyncCallback cb, object state);
IAsyncResult EndAdd();
C. [OperationContract]
IAsyncResult BeginAdd(int num1, int num2);
[OperationContract]
int EndAdd(IAsyncResult res);
D. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2, AsyncCallback cb, object
state);
int EndAdd(IAsyncResult res);
Answer: D
Microsoft 070-503-Csharp시험문제 070-503-Csharp 070-503-Csharp인증
NO.11 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will expose a method named DoProcess to the client applications.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04
05 }
You need to ensure that the client applications are not required to obtain results from the DoProcess
method.
Which code segment should you insert at line 04?
A. [OperationContract(IsOneWay=true)]
bool DoProcess();
B. [OperationContract(IsOneWay=true)]
void DoProcess();
C. [OperationContract(AsyncPattern=false)]
bool DoProcess();
D. [OperationContract(AsyncPattern=false)]
void DoProcess();
Answer: B
Microsoft 070-503-Csharp 070-503-Csharp 070-503-Csharp인증 070-503-Csharp dump 070-503-Csharp자격증
NO.12 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
NO.13 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C
Microsoft 070-503-Csharp인증 070-503-Csharp시험문제
NO.14 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process name={name}")]
Answer: C
Microsoft 070-503-Csharp시험문제 070-503-Csharp 070-503-Csharp자료 070-503-Csharp기출문제
NO.15 }
NO.16 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B
Microsoft 070-503-Csharp dump 070-503-Csharp
NO.17 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B
Microsoft 070-503-Csharp dumps 070-503-Csharp dumps
NO.18 When you browse to the base address of the service, you receive the following message: "Metadata
publishing for this service is currently disabled."
You debug the code and discover that the ServiceMetadataBehavior behavior was previously nonexistent.
You need to enable metadata publishing.
What should you do?
A. Delete lines 15 and 16.
B. Modify the code segment at line 03 in the following manner.
Uri mexAddress=new Uri("/service");
C. Insert the following code segment at line 11.
smb.HttpGetEnabled=true;
D. Insert the following code segment at line 19.
smb.HttpGetEnabled=true;
Answer: D
Microsoft최신덤프 070-503-Csharp 070-503-Csharp dump 070-503-Csharp 070-503-Csharp
17. You are creating an endpoint for a Windows Communication Foundation service by using
Microsoft .NET Framework 3.5. You create the endpoint by using a custom binding.
You write the following code segment.
BasicHttpBinding binding=new BasicHttpBinding();
binding.Security.Message.ClientCredentialType=
?BasicHttpMessageCredentialType.Certificate;
binding.Security.Mode=BasicHttpSecurityMode.Message;
CustomBinding cb=new CustomBinding(binding);
BindingElementCollection bec=cb.CreateBindingElements();
You need to prevent the custom binding from making a persistent connection to the service endpoint.
Which code segment should you use?
A. cb.SendTimeout=TimeSpan.Zero;
B. binding.ReceiveTimeout=TimeSpan.Zero;
C. foreach (BindingElement bindingElement in bec)
{
HttpTransportBindingElement element=
(HttpTransportBindingElement) bindingElement;
element.KeepAliveEnabled=false;
}
D. foreach (BindingElement be in bec)
{
if (be is HttpTransportBindingElement)
{
HttpTransportBindingElement httpElement=
(HttpTransportBindingElement)be;
httpElement.KeepAliveEnabled=false;
}
}
Answer: D
Microsoft덤프 070-503-Csharp pdf 070-503-Csharp pdf 070-503-Csharp 070-503-Csharp
18. You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service will receive notification messages from client applications by using a number of transports,
including HTTP, TCP, MSMQ, and others.
You need to ensure that all client applications can send notification messages to the service.
Which service contract should you use?
A. [ServiceContract]
public interface INotificationService {
[OperationContract(AsyncPattern=true)]
void LogMessage(string message);
}
B. [ServiceContract]
public interface INotificationService {
[OperationContract(ReplyAction="none")]
void LogMessage(string message);
}
C. [ServiceContract]
public interface INotificationService {
[OperationContract(IsOneWay=true)]
void LogMessage(string message);
}
D. [ServiceContract]
public interface INotificationService {
[OperationContract(IsTerminating=true)]
void LogMessage(string message);
}
Answer: C
Microsoft자격증 070-503-Csharp 070-503-Csharp dumps 070-503-Csharp
19. You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B
Microsoft dumps 070-503-Csharp기출문제 070-503-Csharp자격증
NO.19 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A
Microsoft dump 070-503-Csharp 070-503-Csharp
NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You create the following service contract. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04 [OperationContract]
05
06 List<string> GetData(int index);
07 }
You need to ensure that the GetData operation can be accessed by using the URI in the following
manner:
ø GetData/1 for the index value 1
ø GetData/2 for the index value 2
ø .
ø .
ø GetData/n for the index value n
Which code segment should you insert at line 05?
A. [WebGet(UriTemplate="GetData/{index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
B. [WebGet(UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
C. [WebGet(UriTemplate="GetData/[index]",
?BodyStyle=WebMessageBodyStyle.Bare)]
D. [WebGet[UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare]]
Answer: A
Microsoft dump 070-503-Csharp인증 070-503-Csharp 070-503-Csharp
ITexamdump의 JN0-380덤프의 VCE테스트프로그램과 000-274덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-332시험에 대비한 고품질 덤프와 NS0-504시험 최신버전덤프를 제공해드립니다. 최고품질 70-460시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기