IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Microsoft인증 70-544-VB덤프로Microsoft인증 70-544-VB시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
Microsoft 70-544-VB인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리ITExamDump에서는 빠른 시일 내에Microsoft 70-544-VB관련 자료를 제공할 수 있습니다. ITExamDump의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. ITExamDump 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.
우리ITExamDump 사이트에서Microsoft 70-544-VB관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다.빨리 우리 ITExamDump의 덤프를 만나보세요.
요즘같이 시간인즉 금이라는 시대에, 우리 ITExamDump선택으로Microsoft 70-544-VB인증시험응시는 아주 좋은 딜입니다. 우리는 100%시험패스를 보장하고 또 일년무료 업데이트서비스를 제공합니다. 그리고 시험에서 떨어지셨다고 하시면 우리는 덤프비용전액 환불을 약속 드립니다.
ITExamDump의 Microsoft인증 70-544-VB덤프를 공부하여Microsoft인증 70-544-VB시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Microsoft인증 70-544-VB덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.
시험 번호/코드: 70-544-VB
시험 이름: Microsoft (TS: Ms Virtual Earth 6.0, Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 67 문항
업데이트: 2014-03-06
Microsoft 인증70-544-VB시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의Microsoft 인증70-544-VB덤프자료에 주목하세요. ITExamDump의 Microsoft 인증70-544-VB덤프는 오로지 Microsoft 인증70-544-VB시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.
경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. Microsoft인증 70-544-VB시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게Microsoft인증 70-544-VB시험에서 고득점으로 패스하고 싶다면ITExamDump의Microsoft인증 70-544-VB덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.
70-544-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-544-VB.html
NO.1 You are creating a Virtual Earth 6.0 application. The application will use data that is stored in the
Microsoft MapCruncher output format.
The MapCruncher output is defined in the following manner:
var tileSrc = http://dev.live.com/virtualearth/sdk/layers/layer1
You need to ensure that the application displays the data as a new layer on the Virtual Earth map.
Which code segment should you use?
A. var tileSourceSpec = new VETileSourceSpecification("layer1/%4.png", tileSrc);
map.AddTileLayer(tileSourceSpec, true);
B. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%4);
map.AddTileLayer(tileSourceSpec, true);
C. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + "/%4.png");
map.AddTileLayer(tileSourceSpec, true);
D. var tileSourceSpec = new VETileSourceSpecification("layer1", tileSrc + /%1.png);
map.AddTileLayer(tileSourceSpec, true);
Answer: C
Microsoft인증 70-544-VB 70-544-VB dumps
NO.2 You are managing Microsoft MapPoint Web Service (MWS) data in an application by using the
Customer Services site. The application uses the DS_ONE data source stored on the Customer Services
site.
The application displays several records in the wrong locations on the map.
You need to display these records correctly on the map.
What should you do?
A. View the data source geocoding results. Filter on match code. Manually edit all the resulting locations
through the Customer Services site.
B. Download the data source. Remove the latitude and longitude data. Re-upload the corrected data to
the Customer Services site.
C. Download the data source. Update all the locations by using a Find or FindAddress call. Re-upload the
corrected data to the Customer Services site.
D. Download the data source. Update each bad geocode by using a Find or FindAddress call. Re-upload
the corrected data to the Customer Services site.
Answer: A
Microsoft기출문제 70-544-VB 70-544-VB최신덤프 70-544-VB dump 70-544-VB자격증
NO.3 You are creating a Virtual Earth 6.0 application that retrieves locations from a Microsoft SQL Server
2005 database.
A stored procedure will be used to retrieve only locations that lie within the currently displayed map area.
You need to define the boundary within which the locations displayed on the map must lie.
How should you define the boundary?
A. points represented by the bottom-right and top-left pixel coordinates
B. points represented by the bottom-right and top-left latitude and longitude coordinates
C. the center point of a circle whose radius is equal to the size of the map based on pixel coordinates
D. the center point of a circle whose radius is equal to the size of the map based on latitude and longitude
coordinates
Answer: B
Microsoft 70-544-VB dump 70-544-VB
NO.4 Your Microsoft MapPoint Web Service (MWS) User Id is 124566, and your MWS password is
P@ssw0rd.
You need to use MWS to create an application.
Which code segment should you use?
A. Dim appCredential As New System.Net.NetworkCredential("124566", "P@ssw0rd")
B. Dim appCredential = New System.Security.Principal.NTAccount("124566", "P@ssw0rd")
C. Dim appCredential As New System.Security.Principal.GenericIdentity("124566", "P@ssw0rd")
D. Dim appCredential As New System.EnterpriseServices.SecurityIdentity("124566", "P@ssw0rd")
Answer: A
Microsoft dump 70-544-VB시험문제 70-544-VB 70-544-VB 70-544-VB
NO.5 You deploy a Virtual Earth 6.0 application that uses Microsoft ASP.NET Asynchronous JavaScript and
XML (AJAX) implementation to retrieve data.
The myAjaxCallback function evaluates any AJAX response. The function contains the following code
segment. (Line numbers are included for reference only.)
At the time the request was made, the server was overloaded. When the server processed the AJAX
request, the server returned an error message.
You need to ensure that the application does not produce a fatal exception due to the error generated
from the AJAX response.
Which code segment should you insert at line 03?
A. If(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
else{
// Update user with status here.
}
B. try{
eval(xmlHttp.responseText);
}
catch(error){
// Update user with status here.
}
C. try{
eval(xmlHttp.responseText);
}
catch(error){
eval(xmlHttp.responseXML);
}
D. try{
eval(xmlHttp.responseText);
}
catch(error){
if(xmlHttp.status == 200){
eval(xmlHttp.responseText);
}
}
Answer: A
Microsoft자격증 70-544-VB 70-544-VB최신덤프 70-544-VB기출문제
NO.6 You are updating a Virtual Earth 6.0 store locator. A database table named Stores contains the City and
State fields. A Microsoft SQL Server 2005 function named CalculateDistance measures the distance
between two points.
The store locator contains a stored procedure named LookupStores that retrieves the names of stores
located in a given city and state. The city and state are passed in as parameters to the stored procedure.
You need to extend the store locator to support a proximity search within a given radius.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add a Radius field to the Stores table.
B. Add a Distance field to the Stores table.
C. Add Latitude and Longitude fields to the Stores table.
D. Extend the LookupStores stored procedure to use CalculateDistance.
E. Create a new stored procedure that uses CalculateDistance along with the result set from the
LookupStores stored procedure.
F. Create a new stored procedure that uses CalculateDistance along with the entire data set from the
Stores table.
Answer: C AND F
Microsoft 70-544-VB인증 70-544-VB 70-544-VB
NO.7 You are creating a custom tile set by using Microsoft MapCruncher.
The tile set must overlay a weather map image in a Virtual Earth 6.0 application by using MapCruncher.
You need to perform two tasks before using MapCruncher to create the custom tile set.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Split the weather map image into tiles.
B. Obtain the latitude and longitude coordinates for the corners of the weather map image.
C. Apply the proper alpha filter to the weather map image to display any transparent portions on the
Virtual Earth map.
D. Obtain low resolution weather map images for low zoom levels and high resolution weather map
images for high zoom levels.
Answer: B AND C
Microsoft 70-544-VB기출문제 70-544-VB 70-544-VB덤프
NO.8 You are writing a code segment for a Virtual Earth 6.0 application. The code segment returns data for
multiple locations to a client-side JavaScript function that makes the initial request.
The returned data contains the following properties for each location:
ID
Latitude
Longitude
Address
You need to format all locations and their properties in JavaScript Object Notation (JSON) format.
Which code segment should you use?
A. var results = new Array();
results[0] = 123;
results[1] = 40.0;
results[2] = -74.0;
results[3] = " 123 Main St .";
B. var results = new Array();
results[0] = new Array();
results[0][0] = 123;
results[0][1] = 40.0;
results[0][2] = -74.0;
results[0][3]= " 123 Main St .";
C. var results = {
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St ."
};
D. var results = {
0:{
ID: 123,
Latitude: 40.0,
Longitude: -74.0,
Address: " 123 Main St "
}
};
Answer: D
Microsoft인증 70-544-VB자격증 70-544-VB dumps
NO.9 A Virtual Earth 6.0 application loads locations from a local Microsoft SQL Server 2005 database. You
update locations in the database manually.
You plan to automate the manual process.
You need to ensure that the automation process updates the maximum number of locations in the least
amount of time.
What should you do?
A. Call the Find method for each location by using Microsoft MapPoint Web Service.
B. Call the FindAddress method for each location by using Microsoft MapPoint Web Service.
C. Push all locations to Customer Data Services by using the UploadSpecification class, and retrieve the
results.
D. Push all locations to Customer Data Services by using the BatchGeocodeSpecification class, and
retrieve the results.
Answer: D
Microsoft기출문제 70-544-VB자격증 70-544-VB 70-544-VB
NO.10 You are integrating third-party data into a Virtual Earth 6.0 application. The data that is retrieved from
the third party is stored in an array named Results. The Results array is stored inside a Web handler. The
data is stored in the following format.
The Web handler uses the GeoRSSFeed class to accept items of type GeoRSSItem. The class contains
the ToString() method that writes the GeoRSS feed to a string.
The Web handler GeoRSS integration is defined by the following code segment. (Line numbers are
included for reference only.)
You need to encode the data inside the Results array into the GeoRSS format.
Which code segment should you insert at line 05?
A. Dim objEnumerator As IEnumerator
Dim Keys As Collections.Generic.Dictionary(Of String, _ String).KeyCollection = Results(i).Keys()
Dim curKey As String
objEnumerator = Keys.GetEnumerator()
Do While objEnumerator.MoveNext
curKey = objEnumerator.Current
curItem.Add(curKey, Results(i)(curKey))
Loop
B. curItem.Add("title", Results(i)("name"))
curItem.Add("description", Results(i)("address"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
curItem.Add("icon", Results(i)("thumbnail"))
C. curItem.Add("title", Results(i)("name"))
curItem.Add("description", String.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail")))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
D. curItem.Add("name", Results(i)("name"))
curItem.Add("address", string.Format("{0}|{1}", _
Results(i)("address"), Results(i)("thumbnail"))
curItem.Add("latitude", Results(i)("latitude"))
curItem.Add("longitude", Results(i)("longitude"))
Answer: C
Microsoft 70-544-VB 70-544-VB 70-544-VB
ITexamdump의 BAS-013덤프의 VCE테스트프로그램과 000-089덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-409시험에 대비한 고품질 덤프와 C_ISR_60시험 최신버전덤프를 제공해드립니다. 최고품질 70-460시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기